= Installation guide =
[[rTWiToC]]

 * [#prerequisites Prerequisites]
 * [#installation Installation]
 * [#troubleshooting Troubleshooting]

== Prerequisites == #prerequisites

 * rTorrent 0.8.0
  * compiled with "--with-xmlrpc-c"
  * sigc++-2.0
 * XMLRPC-C >= 1.00 ( >= 1.07 recommended)
 * some webserver
  * php5, with the following extensions:
   * curl (when using an SCGI gateway)
   * xml
   * xsl (libxslt1.1)
   * xmlrpc

== Installation == #installation

 * [#rtorrentside rTorrent side]
  * [#preparing Preparing the system]
  * [#xmlrpc Installing XMLRPC-C]
  * [#libtorrent Installing libTorrent]
  * [#rtorrent Installing rTorrent]
  * [#rtorrentsetup Setting up rTorrent]
 * [#rtwiside rTWi side]
  * [#rtwi Installing rTWi]
  * [#addingusers Adding users]
  * [#geoipsupport GeoIP support (optional)]
----
=== rTorrent side === #rtorrentside

==== Preparing the system ==== #preparing

You might need the following packages to install xmlrpc-c, libtorrent and rtorrent
 * make
 * pkg-config
 * sigc++-2.0-dev
 * libncurses-dev
 * libcurl-openssl-dev

==== Installing XMLRPC-C ==== #xmlrpc

To install xmlrpc, get the source from [http://sourceforge.net/project/showfiles.php?group_id=16847 The XMLRPC-C page][[BR]]
In my case, i could only compile the 1.11.00 version (due to a known bug, you may try to configure with --disable-cplusplus, if the compiling stops with some syntax error)[[BR]]
Of course, you can try any version, over 1.07 (or any version over 1.00, but you'll get incorrect data for values bigger than 2^31^-1, since it does not support 64bit integers)

Follow the next steps:
{{{
cd /usr/src
wget http://dfn.dl.sourceforge.net/sourceforge/xmlrpc-c/xmlrpc-c-1.11.00.tgz
tar xvf xmlrpc-c-1.11.00.tgz
cd xmlrpc-c-1.11.00
./configure
make
make install
}}}

==== Installing libTorrent ==== #libtorrent

To install libtorrent, follow the next steps:
{{{
mkdir /usr/src/libtorrent
wget http://libtorrent.rakshasa.no/downloads/libtorrent-0.12.0.tar.gz
tar xvf libtorrent-0.12.0.tar.gz
cd /usr/src/libtorrent-0.12.0
./configure
make
make install
}}}

==== Installing rTorrent ==== #rtorrent

To install rtorrent, follow the next steps:
{{{
mkdir /usr/src/rtorrent
wget http://libtorrent.rakshasa.no/downloads/rtorrent-0.8.0.tar.gz
tar xvf rtorrent-0.8.0.tar.gz
cd /usr/src/rtorrent-0.8.0
./configure --with-xmlrpc-c
make
make install
}}}

==== Setting up rTorrent ==== #rtorrentsetup

If you don't have a .rtorrent.rc file, create one into your home directory.
You can find an example [http://libtorrent.rakshasa.no/browser/trunk/rtorrent/doc/rtorrent.rc?rev=latest .rtorrent.rc] file on the rTorrent page.[[BR]]
Edit your .rtorrent.rc (create on into your home directory, if it's a fresh install):
 * set up how rtorrent should listen for connections (there are 3 ways to do this)
  * to use a unix socket, add the line ''scgi_local = ~/torrent/.socket/rpc.socket'' (this is the recommended way)
  * to listen for connections from localhost on port 12345 add the line ''scgi_port = :12345''
  * to listen for connections from a specific interface on port 12345 add the line ''scgi_port = 123.123.123.123:12345''
 * if you have more than one user, set a different scgi_port/scgi_local value in each user's .rtorrent.rc file
 * set your download directory ''directory = ~/torrent/''
 * absolute paths are always welcome, however rTWi should handle relative paths, like above (if it does not, submit a [/rtwi/newticket ticket]
 * make sure, you have your session directory set and it exists, so rtorrent will remember your torrents after it's restarted ''session = ~/torrent/.session'' (be aware to set different session directories for the users)
 
Now, you can start rTorrent. On the bottom, you should see something like this:
{{{
(20:55:52) XMLRPC initialized with 356 functions.
}}}
----
=== rTWi side === #rtwiside

==== Installing and setting up rTWi ==== #rtwi

Download the [/rtwi/downloads/rtwi-latest.tar.gz latest rTWi] from the [wiki:Download Download] section, extract it to some place where your webserver can see it.
Edit your configuration file (includes/rtwi.conf):
 * set the ''base'' variable to your rTWi installation's URL (without index file, and with a trailing slash) ''base = "http://example.com/"''
 * set the ''user_conf'' variable to the path of your user.conf file (it's always safe, to keep it outside your webroot)
 * if your want to rename your index.php and/or input.php you need to set the ''index'' and/or ''input'' variable(s)
 * If a value in the conf file contains any non-alphanumeric characters it needs to be enclosed in double-quotes (")

==== Adding users ==== #addingusers

Edit your users.conf file:
 * create a new section for every user ''[user1]'' (this will be your login name - this must be the *nix username)
 * set the address rTWi can connect to the user's rTorrent (there are 3 ways to do it)
  * if you're using a unix socket enter ''address = "!unix://~/torrent/.socket/rpc.socket"''
  * if you're using scgi_port enter ''address = "123.123.123.123:12345"'' (''address = ":12345"'' works for localhost)
  * if you're using an SCGI gateway enter ''address = "!http://example.com/RPC2"'' (also works when Basic HTTP Authentication is on for the URL)
 * enter ''pass = "1234567890abcdef1234567890abcdef12345678"'' where the right side is the sha1 hash of the choosen password for the user (you can generate the sha1 hash [http://www.johnmaguire.us/tools/hashcalc/index.php online])
 * if a value in the conf file contains any non-alphanumeric characters it needs to be enclosed in double-quotes (")
 * if you have more than one user, you have to repeat these steps for each one of them, so you'll get something like this:

{{{
[user1]
address =  "unix://~/torrent/.socket/rpc.socket"
pass =     "1234567890abcdef1234567890abcdef12345678"

[user2]
address =  "123.123.123.123:12345"
pass =     "1234567890abcdef1234567890abcdef12345678"

[user3]
address =  "http://example.com/RPC2"
pass =     "1234567890abcdef1234567890abcdef12345678"
}}}
----
==== GeoIP support (optional) ==== #geoipsupport

You need to install the [http://www.maxmind.com/app/c GeoIP c library], and the [http://pecl.php.net/package/geoip GeoIP PECL module][[BR]]
For installing the GeoIP PECL module, you need to have [http://pear.php.net/ PHP-PEAR] installed, and than type
{{{
pecl install geoip
}}}

After it's finished, you might want to add "extension=geoip.so" to php.ini
----
== Troubleshooting == #troubleshooting

'''XMLRPC-C 1.11 compilation stops with some syntax error'''
 * Configure with --disable-cplusplus
 * Check the [http://xmlrpc-c.sourceforge.net/ XMLRPC-C site]

'''rTorrent compilation stops with an errer, which says, i have no libtorrent installed (No package 'libtorrent' found), but i'm sure, i do'''
 * Find your libtorrent.pc file (try /usr/local/lib/pkgconfig), and set the PKG_CONFIG_PATH environmental variable to it's path (export PKG_CONFIG_PATH=/usr/local/lib/pkgconfig)

'''rTorrent compilation stops with an error, which says, my libTorrent's version is an empty string (Requested 'libtorrent >= 0.11.8' but version of libtorrent is )'''
 * Upgrade you automake (you need 1.5 at least)

'''I can see the php code in the browser'''
 * Your php settings does not allows you to to have a php file named .html - change these settings, or rename the index.html to index.php, and set the $default_ext variable to "php" in rtwi's /includes/config.inc.php
 * Php modul is not loaded by the webserver, take a look at your webserver's manual, to find out, how to enable it

'''I get some php errors about XSL, or XSLT...'''
 * Install (or if it's installed, than enable) the xsl php extension

'''I get some php errors about XMLRPC-C...'''
 * Install (or if it's installed, than enable) the xmlrpc php extension

'''I've set my username and my password in the config.inc.php, but i cannot log in'''
 * Did you use the password? You should use the sha1 hash of the password (you can generate the sha1 hash [http://www.johnmaguire.us/tools/hashcalc/index.php online])
 * Enable cookies (or at least session cookies)

'''I get the "No connection" message in rTWi'''
 * Set the same port in your .rtorrent.rc file, at the scgi_port=, and in the rTWi's /includes/config.inc.php at your user's line
 * Check, if rTottent is listening on the port, you've set (netstat -na | grep 12345)
  * '''It is'''
   * Check your firewall
   * Recheck the port set in rtwi's incudes/config.inc.php
  * '''It is not'''
   * Recheck your .rtorrent.rc - it should have a line like this: scgi_port = 127.0.0.1:12345
   * Try to set the scgi port in runtime (Ctrl+X, then entre "scgi_port = 127.0.0.1:12345")
   * If rtorrent stops with an error, that says xmlrpc is not supported, configure xmlrpc-c with --with-xmlrpc-c, and recompile