wiki:InstallationGuide

Context Navigation

Version 19 (modified by Gabor Hudiczius, 16 years ago) ( diff )
--

Installation guide

Prerequisites

rTorrent 0.8.0
- compiled with "--with-xmlrpc-c"
- sigc++-2.0
XMLRPC-C >= 1.00 ( >= 1.07 recommended)
some webserver
- php5, with the following extensions:
  - curl (when using an SCGI gateway)
  - xml
  - xsl (libxslt1.1)

Installation

rTorrent side

Preparing the system

You might need the following packages to install xmlrpc-c, libtorrent and rtorrent

make
pkg-config
sigc++-2.0-dev
libncurses-dev
libcurl-openssl-dev

Installing XMLRPC-C

To install xmlrpc, get the source from The XMLRPC-C page
In my case, i could only compile the 1.11.00 version (due to a known bug, you may try to configure with --disable-cplusplus, if the compiling stops with some syntax error)
Of course, you can try any version, over 1.07 (or any version over 1.00, but you'll get incorrect data for values bigger than 2³¹-1, since it does not support 64bit integers)

Follow the next steps:

cd /usr/src
wget http://dfn.dl.sourceforge.net/sourceforge/xmlrpc-c/xmlrpc-c-1.11.00.tgz
tar xvf xmlrpc-c-1.11.00.tgz
cd xmlrpc-c-1.11.00
./configure
make
make install

Installing libTorrent

To install libtorrent, follow the next steps:

mkdir /usr/src/libtorrent
wget http://libtorrent.rakshasa.no/downloads/libtorrent-0.12.0.tar.gz
tar xvf libtorrent-0.12.0.tar.gz
cd /usr/src/libtorrent-0.12.0
./configure
make
make install

Installing rTorrent

To install rtorrent, follow the next steps:

mkdir /usr/src/rtorrent
wget http://libtorrent.rakshasa.no/downloads/rtorrent-0.8.0.tar.gz
tar xvf rtorrent-0.8.0.tar.gz
cd /usr/src/rtorrent-0.8.0
./configure --with-xmlrpc-c
make
make install

Setting up rTorrent

If you don't have a .rtorrent.rc file, create one into your home directory. You can find an example .rtorrent.rc file on the rTorrent page.
Edit your .rtorrent.rc (create on into your home directory, if it's a fresh install):

set up how rtorrent should listen for connections (there are 3 ways to do this)
- to use a unix socket, add the line scgi_local = ~/torrent/.socket/rpc.socket (this is the recommended way)
- to listen for connections from localhost on port 12345 add the line scgi_port = :12345
- to listen for connections from a specific interface on port 12345 add the line scgi_port = 123.123.123.123:12345
if you have more than one user, set a different scgi_port/scgi_local value in each user's .rtorrent.rc file
set your download directory directory = ~/torrent/
absolute paths are always welcome, however rTWi should handle relative paths, like above (if it does not, submit a ticket
make sure, you have your session directory set and it exists, so rtorrent will remember your torrents after it's restarted session = ~/torrent/.session (be aware to set different session directories for the users)

Now, you can start rTorrent. On the bottom, you should see something like this:

(20:55:52) XMLRPC initialized with 356 functions.

rTWi side

Installing and setting up rTWi

Download the latest rTWi from the Download section, extract it to some place where your webserver can see it. Edit your configuration file (includes/rtwi.conf):

set the base variable to your rTWi installation's URL (without index file, and with a trailing slash) base = "http://example.com/"
set the user_conf variable to the path of your user.conf file (it's always safe, to keep it outside your webroot)
if your want to rename your index.php and/or input.php you need to set the index and/or input variable(s)
If a value in the conf file contains any non-alphanumeric characters it needs to be enclosed in double-quotes (")

Adding users

Edit your users.conf file:

create a new section for every user [user1] (this will be your login name - this must be the *nix username)
set the address rTWi can connect to the user's rTorrent (there are 3 ways to do it)
- if you're using a unix socket enter address = "unix://~/torrent/.socket/rpc.socket"
- if you're using scgi_port enter address = "123.123.123.123:12345" (address = ":12345" works for localhost)
- if you're using an SCGI gateway enter address = "http://example.com/RPC2" (also works when Basic HTTP Authentication is on for the URL)
enter pass = "1234567890abcdef1234567890abcdef12345678" where the right side is the sha1 hash of the choosen password for the user (you can generate the sha1 hash online)
if a value in the conf file contains any non-alphanumeric characters it needs to be enclosed in double-quotes (")
if you have more than one user, you have to repeat these steps for each one of them, so you'll get something like this:

[user1]
address =  "unix://~/torrent/.socket/rpc.socket"
pass =     "1234567890abcdef1234567890abcdef12345678"

[user2]
address =  "123.123.123.123:12345"
pass =     "1234567890abcdef1234567890abcdef12345678"

[user3]
address =  "http://example.com/RPC2"
pass =     "1234567890abcdef1234567890abcdef12345678"

GeoIP support (optional)

You need to install the GeoIP c library, and the GeoIP PECL module
For installing the GeoIP PECL module, you need to have PHP-PEAR installed, and than type

pecl install geoip

Flags can be found here

After it's finished, you might want to add "extension=geoip.so" to your php.ini

Troubleshooting

XMLRPC-C 1.11 compilation stops with some syntax error

Configure with --disable-cplusplus
Check the XMLRPC-C site

rTorrent compilation stops with an errer, which says, i have no libtorrent installed (No package 'libtorrent' found), but i'm sure, i do

Find your libtorrent.pc file (try /usr/local/lib/pkgconfig), and set the PKG_CONFIG_PATH environmental variable to it's path (export PKG_CONFIG_PATH=/usr/local/lib/pkgconfig)

rTorrent compilation stops with an error, which says, my libTorrent's version is an empty string (Requested 'libtorrent >= 0.11.8' but version of libtorrent is )

Upgrade you automake (you need 1.5 at least)

I can see the php code in the browser

Your php settings does not allows you to to have a php file named .html - change these settings, or rename the index.html to index.php, and set the $default_ext variable to "php" in rtwi's /includes/config.inc.php
Php modul is not loaded by the webserver, take a look at your webserver's manual, to find out, how to enable it

I get some php errors about XSL, or XSLT...

Install (or if it's installed, than enable) the xsl php extension

I've set my username and my password in the config.inc.php, but i cannot log in

Did you use the password? You should use the sha1 hash of the password (you can generate the sha1 hash online)
Enable cookies (or at least session cookies)

I get the "No connection" message in rTWi

Set the same port in your .rtorrent.rc file, at the scgi_port=, and in the rTWi's /includes/config.inc.php at your user's line
Check, if rTottent is listening on the port, you've set (netstat -na | grep 12345)
- It is
  - Check your firewall
  - Recheck the port set in rtwi's incudes/config.inc.php
- It is not
  - Recheck your .rtorrent.rc - it should have a line like this: scgi_port = 127.0.0.1:12345
  - Try to set the scgi port in runtime (Ctrl+X, then entre "scgi_port = 127.0.0.1:12345")
  - If rtorrent stops with an error, that says xmlrpc is not supported, configure xmlrpc-c with --with-xmlrpc-c, and recompile

Note: See TracWiki for help on using the wiki.

Download in other formats:

Plain Text